Multipart miniatures can make larger poses easier to print and pack, but clean assembly starts before glue touches the model. Set out every piece, compare it with the product images or assembly guide, and identify which parts need to meet flush. A few minutes of planning can prevent a tilted arm, visible gap, or reversed component.
Dry-fit first
Test the parts without adhesive. Check that keys, tabs, or pegs line up and that the pose looks right from the front and side. If a joint feels tight, inspect for a small support remnant or debris. Remove only what is needed with a sharp hobby tool, working slowly and away from your fingers. Avoid forcing a piece into place; resin details can be brittle.
Choose an adhesive for the material
For many cured resin miniatures, a small amount of cyanoacrylate adhesive is commonly used. Some larger joints benefit from pinning with a small metal rod, but only if the parts are thick enough to drill safely. Always follow the adhesive and tool instructions, protect your eyes, and work with suitable ventilation. Test your method on a hidden area or spare piece if you are unsure.
Align and support the joint
Apply a minimal amount of adhesive, bring the surfaces together, and hold them in the planned position until they set. Wipe away excess before it hardens. For a visible seam, let the joint cure fully before using a small amount of compatible filler and sanding carefully. Keep delicate accessories separate until the main body is secure.
After assembly, inspect the silhouette from multiple angles before priming. If you're choosing a new model, browse our 3D printed miniatures and check the listing for assembly and scale notes.