A good primer coat helps later paint adhere evenly and makes fine details easier to see. Before priming a resin miniature, make sure it is fully cured and prepared according to the seller's instructions. Resin products and coatings vary, so follow the safety and handling information supplied with both the model and the primer.
Use a simple preparation checklist
- Inspect the model. Look for leftover support nubs, dust, or small imperfections. Remove only what you can reach safely without damaging details.
- Clean only when appropriate. If the maker's instructions call for washing, use the recommended method and let the miniature dry completely. Do not assume every resin needs the same cleaning process.
- Protect the work area. Follow the primer label for ventilation, protective equipment, temperature, and distance. Keep spray products away from flames and people or pets.
- Apply light coats. Several thin passes usually preserve detail better than one heavy coat. Let each coat dry as directed before turning the model.
Check the details before painting
When the primer is dry, inspect the face, hands, folds, and small accessories under bright light. If a detail has filled in, the coat may have been too heavy or applied too close. Let the model dry fully before adding acrylic colors, washes, or highlights.
A miniature that arrives unpainted gives you control over the finish, but primer compatibility still matters. Browse our unpainted miniatures and terrain, and read each listing for material and preparation notes before you start.